english
chinese
Your Position : home >Products > Fiber Optic Cable System > Outdoor Fiber Optic Cable > Outdoor Duct Fiber Optic Cable
Products
-
5G System
- Fiber Optic Cable System
- Fiber Cable Distribution System
- FTTH System
-
Patch Cord Production Line
- Fiber Stripping Machine
- Cable Stripping Machine
- Fiber Optic Cutting Machine
- Fiber Optic Polishing Machine
- Fiber Optic Polishing Fixture
- Fiber Optic Heating Oven
- Fiber Optic Crimping Machine
- Fiber Optic Epoxy Injection Machine
- Fiber Optic Microscope
- Pre-Assembly Tools
- IL&RL Testing Machine
- Ultro-sonic cleaning machine
- Interferometer Testing Machine
- Polishing Consumables
- Fiber Stripping Machine
- Fiber Optic Active Devices
-
Optical Cable Pulling machine
<
>
Air-Blown Ribbon Fibre Optic Cable
Application:
1.Suitable for wiring in multiple minefields and places with severe electromagnetic interference
2.Suitable for overhead and laying
3.Long distance communication, inter-office communication
2.Suitable for overhead and laying
3.Long distance communication, inter-office communication
Characteristics:
Central Strength Member(CSM): glass fiber reinforced plastic rod (FRP) with water blocking yarn.
Loose Tube: thermoplastic material, containing up to 12 fibers and filled with a
Suitable water tightness compound.
Filler Elements: thermoplastic rods, where needed.
Stranding: loose tubes (and fillers), SZ stranded around the CSM.
1 Ripcord.
Outer Sheath: HDPE.
Loose Tube: thermoplastic material, containing up to 12 fibers and filled with a
Suitable water tightness compound.
Filler Elements: thermoplastic rods, where needed.
Stranding: loose tubes (and fillers), SZ stranded around the CSM.
1 Ripcord.
Outer Sheath: HDPE.
The fibers are positioned in a loose tube made of a high modulus plastic(PBT). The tubes are filled with a water-resistant filling GEL. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member, water blocking yarns on the FRP. The tube is wrapped with a layer of water blocking yarns. The cable is completed with a HDPE sheath. Ripcord inside the outer jacket.
Characteristics:
- Central Strength Member(CSM): glass fiber reinforced plastic rod (FRP) with water blocking yarn.
- Loose Tube: thermoplastic material, containing up to 12 fibers and filled with a
- Suitable water tightness compound.
- Filler Elements: thermoplastic rods, where needed.
- Stranding: loose tubes (and fillers), SZ stranded around the CSM.
- 1 Ripcord.
- Outer Sheath: HDPE.
|
Fiber Count |
Nominal Diameter (mm) |
Nominal Weight (kg/km) |
Max Fibers per Tube |
No. of (Tubes ) |
Allowable Tensile Load (N) |
Allowable Crush Resistance (N/100mm) |
||
|
Short Term |
Long Term |
Short Term |
Long Term |
|||||
|
24 |
5.6±0.5 |
35±5 |
12 |
2 |
750 |
300 |
1000 |
500 |
|
48 |
5.6±0.5 |
35±5 |
12 |
4 |
750 |
300 |
1000 |
500 |
|
72 |
5.6±0.5 |
35±5 |
12 |
6 |
750 |
300 |
1000 |
500 |
|
96 |
6.7±0.5 |
42±5 |
12 |
8 |
750 |
300 |
1000 |
500 |
|
144 |
8.6±0.5 |
56±5 |
12 |
12 |
750 |
300 |
1000 |
500 |
- This micro cable for blowing into micro ducts.
- Suitable for wiring in multiple minefields and places with severe electromagnetic interference
- Suitable for overhead and laying
- Long distance communication, inter-office communication
-
FAQ
